M2C6585 TEKNO NT48.3 GAS TRUGGY CHASSIS

Home > Parts Kit / Option > Aftermarket Option Parts > M2C Racing > M2C6585 TEKNO NT48.3 GAS TRUGGY CHASSIS

1 Review(s)

Your Price: $79.99

Out of Stock.

Part Number:M2C6585

Description
Customer Reviews

These chassis are made using 4 MM thick 7075 aircraft grade materials and clear anodized. use of the material greatly increases the overall life of the chassis. we have tested and tweeked these chassis to provide the racers a top notch chassis that will perform very well on all surfaces. This model is made for the tracks with a high wear characteristic like the tracks we have out West,up north and in Canada It is important to note that these skid plates fit flush to the bottom of the chassis and will not effect the droop settings and cause you to scrub speed on the landings.

FEATURES: We have made the diff cutout thru which will allow you to lower the cg of the center diff by 2 mm and added material back to this area of the chassis to stiffen up this area. This should help decrease the possibility of broken spur gears due to chassis flex. This model uses the stock motor mount. We have also included (2) 3mm counter sunk holes at the rear of chassis just in front of the rear diff. these are for our optional weight kit to increase rear end traction on looser tracks.

PLEASE NOTE: It is advised you replace the skid plate when the edge of the skid plate wears down to 1 mm. This will make the chassis last much longer. hardened droop stops to prevent chassis wear and droop changes.

INCLUDED IN KIT: skid plates:

Awesome

Awesome chassis

Did you find this helpful?

Reviewed by: casey from otsego. on 1/10/2021